Set of 2 pcs.

Chassis suitable for V-traction, thickness 4mm

Body post of the front.

Shock absorber set for the front of the Elcon Cleon.
The shock absorbers are high volume ones and are NOT leaking!

A special teflon coating is used on the shocker housing for low friction and to reduce wear to a minimum.
The rounded shaped piston with a precise fit provides a minimum contact surface for even less friction & wear.

The piston rod is hardened and presicely grinded and will not corrode.
The special seal at the bottom provides a fully closed shocker even in harse dusty conditions.
But not only does it close the shocker.
It is selected also as the "stick-slip" resistance is significant lower as other currently used seals.
The dampening proces is therefor more true; and not influenced by high friction like o-rings cause.
A low friction piston together with low friction seal ensures an optimal dampening proces.

As there is no leakage of oil, there can also not come any air into the oil medium.
The shock absorber therefor does not get soft or feels like a sponge, but remains stabil as set at the start.
Also after half an hour of non-stop driving.
The spring disc allows maximum travel as the dirt scraper fits in the disc at full compression.

Click here for assembly instructions.
Or click here for a small assembly animation.
Suspension travel: 110 - 155mm
Sold as a set (2 pcs).

Lower wishbone left for the Elcon Cleon.
With option for mounting the steering stopper (51413).

Lower wishbone right for the Elcon Cleon.
With option for mounting steering stopper (51413)

Upper wishbone left/right for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Bulkhead A for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Bulkhead B for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Steering base plate for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Upper deck for the Elcon Cleon.
Delivered inclusive needed assembling materials

Shock tower for the Elcon Cleon.
Assembly materials included.

Pin for wishbone for the Elcon Cleon.
Used on front and v-traction rear.

Shim for adjusting and setting the camber of the front wheels.
Mounted between the front upper wishbone and steel rod-end of the spherical bearing.

Upright left for the Elcon Cleon.
Assembling materials included.

Upright right for the Elcon Cleon.
Assembling materials included.

Distance bushing for the front upright Elcon Cleon.
Keeps wheel bearings on correct distance.

Steering plate for the Elcon Cleon.
Assembly materials included.

Bushing for the steering plate Elcon Cleon