10 pcs of bodyclips.

The wheel axle is made from Stainless Steel, is reinforced and precision grinded.
Thus: no corrosion, improved mechanical characteristics and it fits like a glove.

Length: 52,5mm
A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place.
Sold as a set.

Bolt for mounting the shock absorber onto the lower wishbone.

Set of 4 pcs

Set of 2 pcs.

Used between the rose joints and the uprights.
Hole size: 5.1mm

Rose joint for lower wishbones.

Rose joint with rod-end.
Rod-end has internal M6 thread.
The hole in the ball-joint is 5mm.

Now available in Stainless steel with the pins already pressed in!
This is very suitable for the rear.
Or the lighter version in hard anodized aluminium.
Make your choice!

Chassis suitable for V-traction, thickness 4mm

Body post of the front.

Shock absorber set for the front of the Elcon Cleon.
The shock absorbers are high volume ones and are NOT leaking!

A special teflon coating is used on the shocker housing for low friction and to reduce wear to a minimum.
The rounded shaped piston with a precise fit provides a minimum contact surface for even less friction & wear.

The piston rod is hardened and presicely grinded and will not corrode.
The special seal at the bottom provides a fully closed shocker even in harse dusty conditions.
But not only does it close the shocker.
It is selected also as the "stick-slip" resistance is significant lower as other currently used seals.
The dampening proces is therefor more true; and not influenced by high friction like o-rings cause.
A low friction piston together with low friction seal ensures an optimal dampening proces.

As there is no leakage of oil, there can also not come any air into the oil medium.
The shock absorber therefor does not get soft or feels like a sponge, but remains stabil as set at the start.
Also after half an hour of non-stop driving.
The spring disc allows maximum travel as the dirt scraper fits in the disc at full compression.

Click here for assembly instructions.
Or click here for a small assembly animation.
Suspension travel: 110 - 155mm
Sold as a set (2 pcs).

Ball joint 4mm used on shocker, stabi's, servosaver.

Lower wishbone left for the Elcon Cleon.
With option for mounting the steering stopper (51413).

Lower wishbone right for the Elcon Cleon.
With option for mounting steering stopper (51413)

Upper wishbone left/right for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Bulkhead A for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Bulkhead B for the Elcon Cleon.
Delivered inclusive needed assembling materials.

Steering base plate for the Elcon Cleon.
Delivered inclusive needed assembling materials.