Partnumber: 11401

This Lower Wishbone is made from high quality Alloy, the wishbone is therefor lightweight, stiff and durable. The wishbone has teflon bearings which are resistant against high pressure, dirt and water. The bearings do not need any maintenance or lubrication. The wishbone is fully exchangeable and is delivered with assembling material.

Partnumber: 11402

This Lower Wishbone is made from high quality Alloy, the wishbone is therefor lightweight, stiff and durable. The wishbone has teflon bearings which are resistant against high pressure, dirt and water. The bearings do not need any maintenance or lubrication. The wishbone is fully exchangeable and is delivered with assembling material.

Partnumber: 11403

Just as the lower wishbones only the best material is used for this product. We added as an extra the support for your bearing, see the extension at the end of the wishbone. This will prevent damage of your bearing in (almost) every crash, you will be able to race on instead of doing any repair! The part is delivered with a complete set of assembling materials.

Partnumber: 12401

This Lower Wishbone is made from high quality Alloy. It is lightweight, stiff and durable. We pressed in the best teflon bearings, resistant against dirt, water and high loads. Maintenance or lubrication is not needed. The wishbone is delivered with all needed assembling materials.

Partnumber: 12402

This Lower Wishbone is made from high quality Alloy. It is lightweight, stiff and durable. We pressed in the best teflon bearings, resistant against dirt, water and high loads. Maintenance or lubrication is not needed. The wishbone is delivered with all needed assembling materials.

Partnumber: 12403

On this wishbone we added an extra support for your plastic ballbearing, see the extension at the end of the wishbone. This extension will prevent damage of your bearing in most crashes. You can race on instead of doing any repair! All needed assembling materials are included.

Partnumber: 12404

This front axlemount will form a stable front part of your car with the connection to your wishbones. We used here the same bearings as in the wishbones for minimum friction and no maintenance. The part comes with a complete set of assembling materials.

Partnumber: 12405

Together with front axle A it will form a stable front part of your car with the connection to your wishbones. High quality bearings are used, resistant against dirt and water on a teflon base for minimum friction. The part comes with a complete set of assembling materials.

Partnumber: 12406

The upright left side is light weight. The size is smaller than the standard uprights, smaller bearings are required. The steering arm is fixed with only one bolt as it fits as a puzzle in the upright. Technically the geometry is changed as the points for mounting onto the upper and lower wishbone are shifted by 3mm from each other, this improves the steering of your car. Assembling materials and the stainless steel distance bush are included (excluded bearings). We recommend to use bearing: 18700. The brakes can be mounted on the front of the upright.

Partnumber: 12407

The upright right side is light weight. The size is smaller than the standard uprights, smaller bearings are required. The steering arm is fixed with only one bolt as it fits as a puzzle in the upright. Technically the geometry is changed as the points for mounting onto the upper and lower wishbone are shifted by 3mm from each other, this improves the steering of your car. Assembling materials and the stainless steel distance bush are included (excluded bearings). We recommend to use bearing: 18700. The brakes can be mounted on the front of the upright.

Partnumber: 12451

This lower wishbone is the XL version of the standard wishbone for the Leopard. The wider wheelbase makes the car more stable, width approximate 475mm (depending on installed camber, toe-out). We pressed in the best teflon bearings, resistant against dirt, water and high loads. Maintenance or lubrication is not needed. The wishbone is delivered with assembling material.

Partnumber: 12452

This lower wishbone is the XL version of the standard wishbone. The wider wheelbase makes the car more stable, width approximate 475mm (depending on installed camber, toe-out). We pressed in the best teflon bearings, resistant against dirt, water and high loads. Maintenance or lubrication is not needed. The wishbone is delivered with assembling material.

Partnumber: 12453

This is the wider version of the standard wishbone. It makes the car approximately 475mm wide and more stable to drive. Of course the support for your plastic ballbearing is also made on this wishbone. Assembling materials are included.