][
] 
[13401] Lower Wishbone Front, Left
|
This Lower Wishbone is made from high quality Alloy, the wishbone is therefor light weight, stiff and durable. The wishbone has teflon bearings: resistant against high pressure, dirt and water. Maintenance or lubrication is not needed. The wishbone is fully exchangeable and is delivered with assembling material. |
[13402] Lower wishbone front, right
|
This Lower Wishbone is made from high quality Alloy, the wishbone is therefor light weight, stiff and durable. The wishbone has teflon bearings which are resistant against high pressure, dirt and water. The bearings do not need any maintenance or lubrication. The wishbone is fully exchangeable and is delivered with assembling material. |
[13403] Upper wishbone front
|
Just as the lower wishbones only the best material is used for this product. We added as an extra the support for your bearing, see the extension at the end of the wishbone. This will prevent damage of your bearing in (almost) every crash, you will be able to race on instead of doing any repair! The part is delivered with a complete set of assembling materials. |
[13404] Bulk head A
|
This front axlemount has an open space to mount the stabilization bar if desired. We pressed in the same bearings as used in the wishbones for minimum friction and no maintenance. All needed assembling materials will be included. |
[13405] Bulk head B
|
If you say A than B should follow. Together with the Front Axle Mount A this part will get the best out of the driver and the car. The parts form a solid and stiff base which will give maximum control over the car. The part is delivered with a complete set of assembling materials. |
[13406] Height Adjustment
|
Not strictly necessary but designed for those who want to tune their car till the last drop. No terrain will be feared as you can adjust the height with this item easily. Where possible we machined away material without any compromise to strength. The part comes with a complete set of assembling materials. |
[13407] Shockmount plate front
|
A fine piece of technique. The brake cable holder can be mounted in the desired angle to the right or left side. This will reduce friction of your braking cables to a minimum giving you a optimum control over your car. Delivered together with a complete set of assembling materials. |
[13415] Damper bridge FG baja
|
Damper bridge for the FG baja. With this damper bridge the Elcon front-end can be mounted on the FG baja. |
[13451] Lower wishbone, left - XL
|
This lower wishbone is the XL version of the standard wishbone for the Marder. The wider wheelbase makes the car more stable. We pressed in the best teflon bearings, resistant against dirt, water and high loads. Maintenance or lubrication is not needed. The wishbone is delivered with assembling material. A 15mm longer steering rod is required. |
[13452] Lower wisbone, right - XL
|
This lower wishbone is the XL version of the standard wishbone for the Marder. The wider wheelbase makes the car more stable. We pressed in the best teflon bearings, resistant against dirt, water and high loads. Maintenance or lubrication is not needed. The wishbone is delivered with assembling material. A 15mm longer steering rod is required. |
[13453] Upper wishbone XL
|
The wide version of the upper wishbone. Use in combination with 13451/13452. The car will have a wider wheelbase this will add stability to the car and improve performance. |
[18402] Upright left, front
|
The upright left side is light weight. The size is smaller than the standard uprights, smaller bearings are required. The steering arm is fixed with only one bolt as it fits as a puzzle in the upright. Technically the geometry is changed as the points for mounting onto the upper and lower wishbone are shifted by 3mm from each other, this improves the steering of your car. Assembling materials and the stainless steel distance bush are included (excluded bearings). We recommend to use bearing: 18700. |
[18403] Upright right, front
|
The upright right side is light weight. The size is smaller than the standard uprights, smaller bearings are required. The steering arm is fixed with only one bolt as it fits as a puzzle in the upright. Technically the geometry is changed as the points for mounting onto the upper and lower wishbone are shifted by 3mm from each other, this improves the steering of your car. Assembling materials and the stainless steel distance bush are included (excluded bearings). We recommend to use bearing: 18700. |
[18406] Wheel axle, front (short)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 52,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18407] Wheel axle, front (medium)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 57,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18408] Wheel axle, front (long)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 62,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18409] Wheel axle, front (extra long)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 67,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18410] Servo Saver
|
The servo saver is silky smooth in operation and enables you to fine tune your steering geometry by the use of several options for locating the track-rods and the servo linkages. The force required to enable the servo saver is the same in either direction and the spring tension is fully adjustable. An extra spring is included for those who run an extra strong servo, eg the Tonegawa. For the Leopard an extra collet is needed to mount the servo saver, ask your dealer for part number: 18410-05. Click here for a small animation film. |
[18700] Bearings - 8x16x5mm
|
The roller bearings have a rubber seal to protect the bearings from dirt and sand. Size (inside diameter x outside diameter x width): 8x16x5mm. We recommend you to use these light running bearings in the uprights. Packed as a set of 4 bearings. |
[18806] Distance bush
|
Distance bush made from stainless steel. Unlikely the usual alloy bushes this part won't be pressed together when mounted on the car. Can be used on all types of cars. |
