[18500-7] Connection plate for dif-brake

Partnumber: 18550-7

18550-7 This connection plate is used to mount the diferential brake on the car when the Elcon Drive Train is used (12600 / 13600).
The connection plate is made from stainless steel, needed assembling material is enclosed.

[18550/8] Connection plate for diferential brake

Partnumber: 18550-8

18550-8 This connection plate is used to mount the diferential brake on the car when the FG drive train is used.
The connection plate is made from stainless steel, needed assembling material is enclosed.

[18550] Differential brake

Partnumber: 18550

18550 The differential brake replaces the layshaft rear brake. It can be used on a standard FG with raised diff mounts or with the Elcon drive train 12600 and 13600. The brake is especially suitable for off-road use and is situated between the diff and engine to protect it in the event of any impacts and to ensure it is kept free from dirt as much as possible. Using a single brake also means there are no balancing issues as with outboard cable brakes nor the need for bleeding hydraulic brakes.
difrem The brake disk is made from aluminum and has a special coating to ensure a strong braking action.
Compared to the standard layshaft brake this differential brake is significantly more powerful.

For mounting the differential brake the appropriate connection plate needs to be purchased separately.
In combination with the Elcon Drive Train use: 18550/7.
In combination with a FG drive train use: 18550/8.
The diferential brake is not assembled, click here for instructions.

[18809] Stainless steel brake disk

18809 The brake disks are cutted from stainless steel plate material so they are resistant against corrosion. Use the brake disks together with the parts 18807 or/and 18808 as they are made to fit on each other. The parts are delivered as a set of 2 pieces.