Universal shock absorber for the front. Same dimension in diameter as standard FG shockers. These shockers are NOT leaking ! Travel of this front is about 10% more with same length ! Springs are not delivered with the shock absorber.

Click here for a small animation film.

A special teflon coating is used on the shocker housing for low friction and to reduce wear to a minimum.
The rounded shaped piston with a precise fit provides a minimum contact surface for even less friction & wear.
The piston delivered with the shocker has 1.5mm holes.
We advise to use Elcon silicon oil partno 18330.

The piston rod is hardened and presicely grinded and will not corrode.
The special seal at the bottom provides a fully closed shocker even in harse dusty conditions.
But not only does it close the shocker.
It is selected also as the "stick-slip" resistance is significant lower as other currently used seals.
The dampening proces is therefor more true; and not influenced by high friction like o-rings cause.
A low friction piston together with low friction seal ensures an optimal dampening proces.

As there is no leakage of oil, there can also not come any air into the oil medium.
The shock absorber therefor does not get soft or feels like a sponge, but remains stabil as set at the start.
Also after half an hour of non-stop driving.
The spring disc allows maximum travel as the dirt scraper fits in the disc at full compression.

Click here for assembly instructions.

Sold as a set (2 pcs).

Universal shock absorber for the rear. Same dimension in diameter as standard FG shockers. These shockers are NOT leaking ! Travel of this front is about 10% more with same length ! Springs are not delivered with the shock absorber.

Click here for a small animation film.

A special teflon coating is used on the shocker housing for low friction and to reduce wear to a minimum.
The rounded shaped piston with a precise fit provides a minimum contact surface for even less friction & wear.
The piston delivered with the shocker has 1.5mm holes.
We advise to use Elcon silicon oil partno 18330.

The piston rod is hardened, precisely grinded and will not corrode.
The special seal at the bottom provides a fully closed shocker even in harse dusty conditions.
But not only does it close the shocker.
It is selected also as the "stick-slip" resistance is significant lower as other currently used seals.
The dampening proces is therefor more true; and not influenced by high friction like o-rings cause.
A low friction piston together with low friction seal ensures an optimal dampening proces.

As there is no leakage of oil, there can also not come any air into the oil medium.
The shock absorber therefor does not get soft or feels like a sponge, but remains stabil as set at the start.
Also after half an hour of non-stop driving.
The spring disc allows maximum travel as the dirt scraper fits in the disc at full compression.

Click here for assembly instructions.

Sold as a set (2 pcs).