][
] 
[13404] Bulk head A
|
This front axlemount has an open space to mount the stabilization bar if desired. We pressed in the same bearings as used in the wishbones for minimum friction and no maintenance. All needed assembling materials will be included. |
[13405] Bulk head B
|
If you say A than B should follow. Together with the Front Axle Mount A this part will get the best out of the driver and the car. The parts form a solid and stiff base which will give maximum control over the car. The part is delivered with a complete set of assembling materials. |
[13406] Height Adjustment
|
Not strictly necessary but designed for those who want to tune their car till the last drop. No terrain will be feared as you can adjust the height with this item easily. Where possible we machined away material without any compromise to strength. The part comes with a complete set of assembling materials. |
[13407] Shockmount plate front
|
A fine piece of technique. The brake cable holder can be mounted in the desired angle to the right or left side. This will reduce friction of your braking cables to a minimum giving you a optimum control over your car. Delivered together with a complete set of assembling materials. |
[14401] Wishbone left, front
Partnumber: 14401
|
Delivered as a pair together with the wishbone 14402. This Wishbone is made from high quality Alloy. It is lightweight, stiff and durable; teflon bearings which are resistant against dirt, water and high loads are already pressed in and do not require any maintenance. The bearing (Article 18820) is NOT included. |
[14402] Wishbone right, front
Partnumber: 14402
|
Delivered as a pair together with the wishbone 14401. This Wishbone is made from high quality Alloy. It is lightweight, stiff and durable; teflon bearings which are resistant against dirt, water and high loads are already pressed in and do not require any maintenance. The bearing (Article 18820) is NOT included. |
[14403] Wishbone schocker mount
Partnumber: 14403
|
The shockermount is delivered as a set. The part fits like a puzzle into the wishbone with the cams we added. By using this construction no shear force will be transfered to the bolts. To mount the shockers simply screw item 18813 at both sides onto the shocker mount. With a special clip (no tools needed!) the shocker is secured and will be kept in its place. All the needed assembling materials are enclosed in the set. |
[14404] Shocker mount front
Partnumber: 14404
|
The shocker mount for the Monster-Truck: Strong, Stiff & Durable. But above all it is lightweight. Extra strength was accomplished by the ribs on the two vertical posts, also the weight was reduced by this construction. Together with the part we deliver a double set of the shocker quick mount (part 18813). Mounting your shockers on/off is now easy and quick as 1,2,3. Of course all other nescesarry assembling materials are included also. |
[18402] Upright left, front
|
The upright left side is light weight. The size is smaller than the standard uprights, smaller bearings are required. The steering arm is fixed with only one bolt as it fits as a puzzle in the upright. Technically the geometry is changed as the points for mounting onto the upper and lower wishbone are shifted by 3mm from each other, this improves the steering of your car. Assembling materials and the stainless steel distance bush are included (excluded bearings). We recommend to use bearing: 18700. |
[18403] Upright right, front
|
The upright right side is light weight. The size is smaller than the standard uprights, smaller bearings are required. The steering arm is fixed with only one bolt as it fits as a puzzle in the upright. Technically the geometry is changed as the points for mounting onto the upper and lower wishbone are shifted by 3mm from each other, this improves the steering of your car. Assembling materials and the stainless steel distance bush are included (excluded bearings). We recommend to use bearing: 18700. |
[18406] Wheel axle, front (short)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 52,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18407] Wheel axle, front (medium)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 57,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18408] Wheel axle, front (long)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 62,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18409] Wheel axle, front (extra long)
|
The wheel axle is made from Stainless Steel, is reinforced and precision grinded. Thus: no corrosion, improved mechanical characteristics and it fits like a glove. Length: 67,5mm A special nut with a ripped flange will lock the wheel. The small bolt with the flange on the backside will hold the axle in place. Sold as a set. |
[18410] Servo Saver
|
The servo saver is silky smooth in operation and enables you to fine tune your steering geometry by the use of several options for locating the track-rods and the servo linkages. The force required to enable the servo saver is the same in either direction and the spring tension is fully adjustable. An extra spring is included for those who run an extra strong servo, eg the Tonegawa. For the Leopard an extra collet is needed to mount the servo saver, ask your dealer for part number: 18410-05. Click here for a small animation film. |
[18700] Bearings - 8x16x5mm
|
The roller bearings have a rubber seal to protect the bearings from dirt and sand. Size (inside diameter x outside diameter x width): 8x16x5mm. We recommend you to use these light running bearings in the uprights. Packed as a set of 4 bearings. |
[18806] Distance bush
|
Distance bush made from stainless steel. Unlikely the usual alloy bushes this part won't be pressed together when mounted on the car. Can be used on all types of cars. |
[18813] Shocker quick mount
|
The shocker quick mount is easy to put on and makes quick removal of the shocker possible. Delivered as a pair. Made from stainless steel the part is protected against corrosion. Bolts and special clips are included. The clips can be assembled easy as 1,2,3 by hand! |
[18814] Shafts for wishbone
Partnumber: 18814
|
Stainless Steel shafts for mounting your wishbones. No corrosion after driving in wet conditions by using these Stainless Steel shafts. The shafts are delivered as a pair with the needed clips. Total length: 89.5mm |
[18820] Radial spherical plain bearing
|
This high quality bearing will exclude any space and will take care of long term pleasure driving free of unwanted space. This will optimize more direct steering control and no maintenance of the bearing is required. Together with the bearing the part is delivered with a stainless steel distance bush article 18806 and needed assembling materials. The stainless steel distance bush can also be ordered separately. |
