[14660] Helical gears for MT

Partnumber: 14660

h_gears Helical gear set of 4 gearwheels.
The gears have a helical teeth profile for a smoother and more dureable transmission. The gears are all made from steel and are hardened.
The small gears (pinions) can be secured with 4 grub screws.

The gear set has a ratio 9,47 with following gears:
Z1 - 17T
Z2 - 46T
Z3 - 14T
Z4 - 49T

Different ratios are possible with the upgrade set 18670.
For mounting the Z2 gear partnumber 18606 is needed (gear carrier layshaft).
All gears are interchangeable.

[18606] Gear carrier helical gear

 
18606

This gear carrier is to mount the Z2 gear on the layshaft.
The gear carrier can be secured with 4 grub screws on the layshaft.
On the special layshaft 18607 the 4 connection points for these grubs are foreseen.
The carrier is a low weight carrier.

[18607] Lay shaft for Elcon drive train

 

18607 		This lay shaft is made for use on the Elcon drive train in combination with the helical gears.

The lay shaft is made from stainless steel and is hollow to reduce weight.

To reinforce the shaft on the place where the grubs are tightened we pressed in delrin pieces.

[18660] Helical gear set

h_gears Helical gear set of 4 gearwheels.
The gears have a helical teeth profile for a smoother and more dureable transmission. The gears are all made from steel and are hardened.
The small gears (pinions) are secured with 4 grub screws.

The gear set has a ratio 7,11 with following gears:

Z1 - 19T
Z2 - 45T
Z3 - 16T
Z4 - 48T

Different ratios are possible with the upgrade set 18670.
For mounting the Z2 gear partnumber 18606 is needed (gear carrier layshaft).

[18690] Alloy gear carrier

18690 The gear carrier can be used to replace the plastic gear on the layshaft for a more durable steel gear.
The large FG 48t gear (part no. FG 6048/2) bolts right onto the carrier.
All the necessary bolts for mounting are included.

[18704] Bearings - 10x19x7mm

18704 The roller bearings have a rubber seal to protect the bearings from dirt and sand.

Size (inside diameter x outside diameter x width): 10x19x7mm.

Used on the layshaft.

Packed as a set of 2 bearings.

[18706] Bearings - 10x22x6mm

18706 The roller bearings have a rubber seal to protect the bearings from dirt and sand.
Size (inside diameter x outside diameter x width): 10x22x6mm.
Used on the clutch.
Packed as a set of 2 bearings.